Broadcast Tools Audio Sentinel Manuel d'utilisateur télécharger pdf (Page 24)

e-mail:

[email protected]

voice:

360.854.9559

fax:

866.783.1742

Audio Sentinel

Installation and Operation Manual

SPECIFICATIONS

Specifications

Ethernet Interface: RJ-45, 10base-T or 100base-TX, auto sensing

with link & activity led indicators - Full/half

duplex.

Protocols: TCP/IP, UDP/IP, ARP, ICMP, SNMP, TFTP,

Telnet, DHCP, BOOTP, HTTP, and AutoIP.

Input Level: -14 to +24 dBu, 22 K ohm, balanced.

Transparent (4PDT) Program switcher: Any input level and impedance can be used.

Inputs may be balanced or unbalanced.

Output levels, impedance, distortion, noise and

balancing will match that of the selected input.

Silence Sense (1 & 2) Level: -24 to -35 dB below normal level, in 1dB steps.

Alarm Delay(1 & 2), Restore Delay(1 & 2) Time: 0 (OFF) to 65535 seconds (18 hours, 12 min-

utes and 15 seconds).

Select/EXTernal Input: Closure to ground. Pulled up to 5 VDC.

(Sustained or momentary depending on mode).

Relays (K3, K4, K5): 3 - SPDT dry contacts, 30 VDC @ 1 Amp.

CAUTION! For safety, never connect 120 Vac circuits to the above relays!

Connectors: All I/O, removable euro-block screw terminals.

Mating plugs supplied.

EMI / FCC Compliance: See the Declaration of Conformity page.

Operation is subject to the following two con-

ditions: 1) This device may not cause harmful

interference, and 2) this device must accept

any interference received, including that which

may cause undesired operation.

Required power supply: 7.5 VDC only @ 1 amp. 2.1mm ID x 5.5mm

OD coaxial connector, center positive.

Surge protected. Domestic PS supplied.

Size: 4.20" x 6.00” x 1.55", painted aluminum

chassis w/ 4 - 6-32 mounting holes.

Weight: 2.0 lb.

Options: * CE certified 240 VAC power supply.

* RA-1, 1-RU rack shelf. Accommodates

4 units.

WEBSITE:

Visit our web site for

product updates and

additional information.

1 2 ... 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire

Broadcast Tools Audio Sentinel Manuel d'utilisateur Page 24

Commentaires sur ces manuels