Broadcast Tools Telco Sentinel Manuel d'utilisateur télécharger pdf (Page 10)

e-mail:

voice:

360.854.9559

fax:

866.783.1742

Relay Sentinel Installation and Operation Manual

SETUP

“Monitor/Control” Web Page

The Monitor/Control page allows the monitoring of each relay via each status LED.

The relays may be configured for one of four states. OFF, ON, Pulse with selectable

length of 100 to 2000 milliseconds and reboot with selectable duration of 1 to 30

minutes.

When the desired state and duration is completed, the “SUBMIT” button MUST be

pressed to activate the function.

The user defined Site ID, Time and Date is also displayed.

To select other pages (if authorized), make your selection under the left hand

Navigation column.

Output Relay Label: Used to identify the relay.

Status: Illuminates when each relay is activated.

State: Determines the state a relay will function

Duration: Allows the user to select the timing for pulse or reboot operation.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Pas de commentaire

Broadcast Tools Telco Sentinel Manuel d'utilisateur Page 10