Broadcast Tools SS 4.1 III Manuel d'utilisateur télécharger pdf (Page 47)

Section 4.2 – Adding New Events

A new event can be added to the event list by simply clicking the Add button to bring up

the Add Event Dialog (see Illustration 12). Simply clicking the button that correspond to

the desired type of event will create it.

Illustration 12: The Add

Event Dialog

Section 4.3 – Automating Recordings

Automated recordings are configured by means of the Edit Recording dialog (see

Illustration 13), which can be accessed either by clicking the Recording button in the Add

Event dialog to create a new record event or by touching the Edit button to modify an

existing event.

4.3.1 The 'Start Parameters' Section

The start parameters of each recording are configured in the 'Start Parameters' section.

A recording can be programmed to start on the basis of the wall clock time, referred to

the hard start time, or upon reception of a general-purpose input, or GPI event

originated by a satellite receiver, tone decoder or other external device. Programming a

hard start time is merely a matter of entering the desired start time, in 24 hour 'military'

format. Programming a GPI start involves, in addition to entry of the GPI parameters

themselves (matrix and GPI line numbers) that Window Start and Windows End times

be entered, that define the 'window' during which reception of the appropriate GPI event

will be 'recognized' by RDCatch. It is also optionally possible to specify a Start Delay

between reception of the GPI event and the actual start of the recording.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 139 140

Pas de commentaire

Broadcast Tools SS 4.1 III Manuel d'utilisateur Page 47